ABB CRB 1300 Product Manual page 240

5 Repair
5.3.1 Replacing the cable package
Continued
Reconnecting the CP/CS cabling (if equipped)
1
2
Reconnecting the axis-5 motor connectors
1
2
Continues on next page
240
Action
Insert the male header of the connectors to the
connector plate.
For robots with CP/CS cabling
Reconnect the connectors.
• J1.C1
• J1.C3
Tip
See the number markings on the connectors for
help to find the corresponding connector.
Action
Insert the male header of the motor connectors
to the connector plate.
Reconnect the connectors.
• FB5
• MP5
Tip
See the number markings on the connectors for
help to find the corresponding connector.
© Copyright 2022-2023 ABB. All rights reserved.
Note
xx2000001537
xx2000001536
Note
xx2000001535
xx2000001534
Product manual - CRB 1300
3HAC083111-001 Revision: B