ABB CRB 1300 Product Manual page 552

5 Repair
5.6.6 Replacing the axis-6 motor
Continued
4
Refitting the tubular covers
1
2
3
4
Concluding procedure
1
Continues on next page
552
Action
Refit the process hub.
Action
For robots with protection class IP67 (option
3350-670)
Check the gaskets.
Replace if damaged.
Apply grease to the cable package, cover all
moving area of the package.
Apply grease to the covers that have contacting
area with the cable package.
Refit the tubular covers.
Action
Recalibrate the robot.
© Copyright 2022-2023 ABB. All rights reserved.
Note
Screw: M4x10 12.9 Lafre
2C2B/FC6.9 (4 pcs)
Tightening torque: 2.6 Nm
xx2000001538
Note
xx2000002507
Grease: 3HAC029132-001
Grease: 3HAC029132-001
Screw: M4x10 12.9 Lafre
2C2B/FC6.9
Tightening torque: 2.6 Nm
xx2000001593
Note
Calibration is detailed in section
Calibration on page 663.
Product manual - CRB 1300
3HAC083111-001 Revision: B