ABB CRB 1300 Product Manual page 482

5 Repair
5.5.5 Replacing the axis-4 mechanical stops
Continued
Equipment
Calibration toolbox, Axis Calibra-
tion
24 VDC power supply
Tension adjustment tool for axis-4
timing belt
Dynamometer
Special toolkit for IP67 robots
Replacement of axis-4 mechanical stops
The axis-4 mechanical stops, both flange and slider, are accessible after removing
the housing, see
482
Article number
3HAC074119-001
-
-
-
3HAC078203-001
Replacing the housing and extender unit on page
© Copyright 2022-2023 ABB. All rights reserved.
Note
Delivered as a set of calibration
tools.
Required if Axis Calibration is the
valid calibration method for the
robot.
Used to release the motor brakes.
Included in special toolkit
3HAC076396-001.
Used for measuring the timing
belt tension.
Used with protection class IP67.
Used for the press-fitting of radial
sealings. Includes two sets of ra-
dial sealing assembly tool for
axes 2 to 3 .
378.
Product manual - CRB 1300
3HAC083111-001 Revision: B