ABB CRB 1300 Product Manual page 277

2
Securing the arm system to the base
1
2
3
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Apply grease to the axis-1 mechanical stop slider
and refit it to the swing.
Action
Check the gasket.
Replace if damaged.
Place the arm system slowly down to the base.
Align the oil plugs on the swing with the marked
screws on the axis-1 gearbox.
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued
Note
Grease: 3HAC029132-001
xx2000001703
Note
Gasket on swing: 3HAC067626-001
xx2000001704
xx2000001702
xx2000001699
Continues on next page
277