ABB CRB 1300 Product Manual page 569

3
4
Removing the lamp unit
Notice that the procedure is valid only when the lamp unit needs a replacement.
1
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Disconnect the air hoses.
For robots with Ethernet cabling
Access the connector from the process hub and
disconnect the connector.
• J1.C2
Tip
Take photos of the connector and cable position
before disconnecting them, to have as a reference
when reconnecting.
Tip
The connector clip has to be pressed (1) and
pushed forward (2) to separate the J2.C2 (for
Ethernet cabling).
xx1800002943
Action
Remove the lamp unit cover.
© Copyright 2022-2023 ABB. All rights reserved.
5.7.2 Replacing the axis-2 gearbox
Note
xx2000001539
xx2200001001
Note
xx2200001002
Continues on next page
5 Repair
Continued
569