ABB CRB 1300 Product Manual page 587

Hide thumbs Also See for CRB 1300:

Table of Contents

Releasing the weight support for lower and upper arms

Securing the cable package in the swing

Product manual - CRB 1300

3HAC083111-001 Revision: B

Refit the screws and washers.

Personnel must not, under any circumstances,

be present under the suspended load.

Make sure the lower and upper arms are firmly

secured with the swing.

Remove the roundslings.

Route the cable package up into the lower arm.

Make sure that the the air hoses are facing outside

in the axis-2 cable protector, see the figure as a

guidance for the cable twisting way.

5.7.2 Replacing the axis-2 gearbox

Screw: M6x20 12.9 Gleitmo

603+Geomet 500 (4 pcs)

Tightening torque: 10 Nm

xx2000001626

xx2000001746

Continues on next page

Troubleshooting