Repair; Introduction - ABB CRB 1300 Product Manual

Hide thumbs Also See for CRB 1300:

Table of Contents

5 Repair

Structure of this chapter

This chapter describes repair activities for the CRB 1300. Each procedure contains

the information required to perform the activity, for example spare parts numbers,

required special tools, and materials.

Report replaced units

Safety information

Make sure to read through the chapter

service work.

Product manual - CRB 1300

3HAC083111-001 Revision: B

Repair activities not described in this chapter must only be carried out by ABB.

When replacing a part on the CRB 1300, report to your local ABB the serial

number, the article number, and the revision of both the replaced unit and the

replacement unit.

This is particularly important for safety equipment to maintain the safety integrity

of the installation.

The robot should be secured with the transportation brackets during removing

from/refitting to the foundation.

If the CRB 1300 is connected to power, always make sure that the CRB 1300 is

connected to protective earth and a residual current device (RCD) before starting

any repair work.

For more information see:

Product manual - OmniCore C30

Product manual - OmniCore C90XT

Safety on page 15

before commencing any

5.1 Introduction