ABB CRB 1300 Product Manual page 679

Spare parts
When calibration is not being performed, a protective cover and an o-ring should
always be installed on the fixed calibration pin as well as a protective plug, included
a sealing, in the bushing. Replace damaged parts with new.
Spare part
Protective plug for 10-mm
bushing
Protective plug for 12-mm
bushing
Calibration pin cover, 10 mm
Calibration pin cover, 14 mm
O-ring on calibration pin
O-ring on calibration pin
Product manual - CRB 1300
3HAC083111-001 Revision: B
6.4.3 Installation locations for the calibration tools
Article number
3HAC053237-003
3HAC053237-002
3HAC056253-003
3HAC056253-002
3HAC061327-022
3HAC061327-011
© Copyright 2022-2023 ABB. All rights reserved.
6 Calibration
Note
Replace if damaged or missing.
Replace if damaged or missing.
Replace if damaged or missing.
Replace if damaged or missing.
Replace if damaged or missing.
Replace if damaged or missing.
Continued
679