5 Repair
5.5.3 Replacing the tubular and tilt unit
Continued
4
Refitting the axis-5 motor
1
2
3
Continues on next page
470
Action
Secure the motor with the screws.
Action
Check that:
•
all assembly surfaces are clean and without
damages
•
the motor is clean and undamaged.
Orient the motor correctly and fit it into the tubular.
Refit the screws and washers.
Note
Do not tighten the screws yet.
© Copyright 2022-2023 ABB. All rights reserved.
Note
Tightening torque: 6 Nm
xx2000001599
Note
Motor orientation: orient the motor
according to the figure below, in
regard to the encircled motor con-
nector.
xx2000001598
Screw: M5x16 12.9 Lafre
2C2B/FC6.9 (4 pcs)
xx2000001596
Product manual - CRB 1300
3HAC083111-001 Revision: B