Lifting And Rotating A Suspended Mounted Manipulator - ABB CRB 1300 Product Manual

3.3.1.2 Lifting and rotating a suspended mounted manipulator

Introduction
How to lift and turn the robot to a suspended position using the turning accessory
is described in the lifting instruction delivered with the lifting accessory. Article
numbers for the accessory and the instruction is specified in
page
lifting accessory. Contact ABB for more information.
How to lift and turn the robot into position for wall position: Contact ABB for more
information.
Product manual - CRB 1300
3HAC083111-001 Revision: B
3.3.1.2 Lifting and rotating a suspended mounted manipulator
717. Any additional equipment required is specified in the instruction for the
© Copyright 2022-2023 ABB. All rights reserved.
3 Installation and commissioning
Special tools on
Continues on next page
63