ABB CRB 1300 Product Manual page 186

4 Maintenance
4.5.1 Lubricating the cable package
Continued
Robot type Rear connector interface
CRB 1300-
7/1.4 and
xx2000001256
Required tools and equipment
Equipment
Standard toolkit
Other tools and procedures may be required
if the spare part needs to be replaced. These
are specified in the replacement procedure.
Required consumables
Consumable
Grease
Lubricating the cable package
Use this procedure to lubricate the cable package.
1
2
Continues on next page
186
Action
DANGER
Turn off all:
• electric power supply
• hydraulic pressure supply
• air pressure supply
to the robot, before entering the robot
working area.
Gain access to the cable package by remov-
ing the covers.
© Copyright 2022-2023 ABB. All rights reserved.
Bottom connector interface
xx2000001257
Note
The content is defined in the section
ard toolkit on page
Article number Note
3HAC029132-001 FM 222
Information
Stand-
716.
Product manual - CRB 1300
3HAC083111-001 Revision: B