ABB CRB 1300 Product Manual page 500

Hide thumbs Also See for CRB 1300:

Table of Contents

5.6.2 Replacing the axis-2 motor

Disconnecting the axis-2 motor connectors

Continues on next page

Make sure that all supplies for electrical power,

hydraulic pressure, and air pressure are turned

Remove the connector plate.

Be aware of the cablings that are attached to the

connector plate! The connector plate cannot be

removed completely until the connectors are re-

move from the plate, as shown in following step.

Cut the cable strap.

Disconnect the connectors.

Take photos of the connector and cable position

before disconnecting them, to have as a reference

when reconnecting.

Snap loose and remove the male head of the

connectors from the connector plate.

xx2000001548

xx2000001640

xx2000001639

xx2000001641

Product manual - CRB 1300

3HAC083111-001 Revision: B

Troubleshooting