ABB CRB 1300 Product Manual page 262

5 Repair
5.4.1 Replacing the base
Continued
Spare part
Gasket for housing cover
Gasket for lower arm cover
Gasket for swing support, short
Gasket for swing support, long
Gasket for swing cover, short
Gasket for swing cover, long
Gasket for swing top cover
Seal bolt
Required tools and equipment
Equipment
Standard toolkit
Calibration toolbox, Axis Calibra-
tion
24 VDC power supply
Oil collecting vessel
Connector for quick coupling, with
outlet pipe
Oil dispenser
Quick coupling assembly tool
Axis-1 gearbox assembly cap
Axis-1 gearbox/motor sealing
pressfit tool
Continues on next page
262
Article number
3HAC067833-001
3HAC067832-001
3HAC067822-001
3HAC067823-001
3HAC067824-001
3HAC067825-001
3HAC067821-001
3HAC032050-001
Article number
-
3HAC074119-001
-
-
-
-
-
-
-
© Copyright 2022-2023 ABB. All rights reserved.
Note
Used with protection class IP67.
Replace if damaged.
Used with protection class IP67.
Replace if damaged.
Used for CRB 1300-11/0.9.
Used with protection class IP67.
Replace if damaged.
Used for CRB 1300-10/1.15 and
CRB 1300-7/1.4.
Used with protection class IP67.
Replace if damaged.
Used for CRB 1300-11/0.9.
Used with protection class IP67.
Replace if damaged.
Used for CRB 1300-10/1.15 and
CRB 1300-7/1.4.
Used with protection class IP67.
Replace if damaged.
Used with protection class IP67.
Replace if damaged.
Used with protection class IP67.
Replace if damaged.
Note
Content is defined in section
Standard toolkit on page 716.
Delivered as a set of calibration
tools.
Required if Axis Calibration is the
valid calibration method for the
robot.
Used to release the motor brakes.
The capacity of the vessel must
be sufficient to take the complete
amount of oil.
Used for draining and filling oil to
axis-1 gearbox.
Connector specification: G3/8
Includes pump with outlet pipe.
Included in special toolkit
3HAC076396-001.
Included in special toolkit
3HAC076396-001.
Included in special toolkit
3HAC076396-001.
Product manual - CRB 1300
3HAC083111-001 Revision: B