Gears; Replacing The Axis-1 Gearbox - ABB IRB 6710 Product Manual

5.8 Gears

5.8.1 Replacing the axis-1 gearbox

Location of the gearbox
The gearbox is located as shown in the figure.
xx2200001406
Summary of the replacement procedure
This is a brief summary of the replacement procedure, containing the major actions
to be performed.
Product manual - IRB 6710
3HAC085695-001 Revision: A
1 Drain the axis-1 gearbox.
2 Remove the cabling from the base.
3 Remove the axis-1 motor.
4 Remove the complete arm system (complete robot excluding the base and
axis-1 gearbox) as an assembly.
5 Replace the axis-1 gearbox.
© Copyright 2023 ABB. All rights reserved.
5.8.1 Replacing the axis-1 gearbox
Continues on next page
5 Repair
429