ABB CRB 1300 Product Manual page 421

The tilt unit is located as shown in the figure.
xx2000001479
Required spare parts
Spare part
Tilt unit
Tilt unit, IP67
Tubular
Tubular support
Tubular support, IP67
Gear unit, axis 4
Motor unit, axis 4
Motor unit, axis 5 and axis 6
Timing belt, axis 4
Timing belt, axis 5
Timing belt, axis 6
Mechanical stop, axis 4, flange
Mechanical stop, axis 4, slider
Product manual - CRB 1300
3HAC083111-001 Revision: B
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2022-2023 ABB. All rights reserved.
5.5.3 Replacing the tubular and tilt unit
Article number Note
3HAC073083-001 Used with protection class IP40.
3HAC077804-001 Used with protection class IP67.
3HAC073081-001
3HAC073082-001 Used with protection class IP40.
3HAC077803-001 Used with protection class IP67.
3HAC073084-001
3HAC073087-001
3HAC073088-001
3HAC065806-001
3HAC065794-001
3HAC065788-001
3HAC065805-001 Replace if damaged.
3HAC065804-001 Replace if damaged.
5 Repair
Continued
Continues on next page
421