ABB CRB 1300 Product Manual page 351

2
3
Check the radial sealing on the swing top
1
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
For robots with protection class IP67 (option
3350-670)
Refit the sealing ring on the swing side.
Refit the sealing ring on the swing support side.
Note
This procedure is valid for robots with:
• protection class IP67 (option 3350-670)
Action
Check the radial sealing on the swing top.
Replace if damaged, as described below.
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the lower arm
Continued
Note
Sealing ring, swing side:
3HAC065675-001
Screw: M4x12 12.9 Lafre
2C2B/FC6.9 (8 pcs)
Tightening torque: 3.8 Nm
xx2000002516
Sealing ring, swing support side:
3HAC065676-001
Screw: M4x12 12.9 Lafre
2C2B/FC6.9 (16 pcs)
Tightening torque: 3.8 Nm
xx2000001692
Note
xx2000002460
Continues on next page
351