ABB CRB 1300 Product Manual page 270

5 Repair
5.4.1 Replacing the base
Continued
4
Refitting the base
Use these procedures to refit the base.
Checking the radial sealings on the base
1
2
Continues on next page
270
Action
Pull out the gearbox.
Action
Check the radial sealings on the base.
Replace if damaged, as described below.
Place the new motor-side radial sealing in its
groove in the base.
The sealing lip is towards the swing side.
© Copyright 2022-2023 ABB. All rights reserved.
Note
xx2000001695
Note
xx2000001713
Radial sealing: 3HAC066433-001
xx2000001714
Product manual - CRB 1300
3HAC083111-001 Revision: B