Standard Toolkit - ABB CRB 1300 Product Manual

9 Reference information

9.6 Standard toolkit

9.6 Standard toolkit
General
All service (repairs, maintenance, and installation) procedures contains lists of
tools required to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools
that are considered standard are gathered in the standard toolkit and defined in
the following table.
This way, the tools required are the sum of the standard toolkit and any tools listed
in the instruction.
Contents, standard toolkit
Qty
1
1
1
1
1
1
1
2
1
1
1
716
Tool
Ring-open-end spanner 8-19 mm
Socket head cap 2.5-17 mm
Torx socket no: 20-60
Box spanner set
Torque wrench 10-100 Nm
Torque wrench 75-400 Nm
Ratchet head for torque wrench 1/2
Hexagon-headed screw M10x100
Hexagon-headed screw M16x90
Hex head allen wrench drill bit set M2-M8 (φ 2.5 mm - φ
10 mm)
Plastic mallet
© Copyright 2022-2023 ABB. All rights reserved.
Rem.
Product manual - CRB 1300
3HAC083111-001 Revision: B