ABB CRB 1300 Product Manual page 272

5 Repair
5.4.1 Replacing the base
Continued
Checking the quick coupling on the base
1
2
Refitting the axis-1 gearbox
1
Continues on next page
272
Action
Check the quick coupling.
Replace if damaged.
Use the quick coupling assembly tool to remove
and refit the quick coupling.
Apply flange sealing Loctite 577 on the mounting
surfaces of the quick coupling and wipe clean if
there is any overflowing Loctite 577.
Action
Check the O-ring.
Replace if damaged.
© Copyright 2022-2023 ABB. All rights reserved.
Note
Quick coupling: 3HAC074630-001
xx2000001681
Quick coupling assembly tool. In-
cluded in special toolkit
3HAC076396-001.
Tightening torque: N/A, tighten up
properly.
xx2000001335
Note
O-ring on axis-1 gear unit:
3HAC063187-007
xx2000001696
Product manual - CRB 1300
3HAC083111-001 Revision: B