Calibration Movement Directions For All Axes - ABB CRB 1300 Product Manual

Hide thumbs Also See for CRB 1300:

Table of Contents

6 Calibration

6.2.2 Calibration movement directions for all axes

When calibrating, the axis must consistently be run towards the calibration position

in the same direction in order to avoid position errors caused by backlash in gears

and so on. Positive directions are shown in the graphic below.

Calibration service routines will handle the calibration movements automatically

and these might be different from the positive directions shown below.

Manual movement directions

xx2200001140

Product manual - CRB 1300

3HAC083111-001 Revision: B