ABB CRB 1300 Product Manual page 396

5 Repair
5.5.2 Replacing the housing and extender unit
Continued
Removing the extender unit
Use these procedures to continuously remove the extender unit after removing
the housing.
Removing the axis-4 mechanical stop flange
1
2
Removing the axis-4 gearbox
1
Continues on next page
396
Note
Only CRB 1300-7/1.4 and have an extender unit, connecting the housing and
tubular.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Remove the axis-4 mechanical stop flange.
CAUTION
The axis-4 mechanical stop slider is accessible
from the housing.
Put it aside for later refitting.
xx2000001674
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
© Copyright 2022-2023 ABB. All rights reserved.
Note
xx2000001673
Note
Product manual - CRB 1300
3HAC083111-001 Revision: B