Replacing The Axis-4 Mechanical Stops - ABB CRB 1300 Product Manual

5.5.5 Replacing the axis-4 mechanical stops

Location of the mechanical stops
The mechanical stops are located as shown in the figure.
xx2200001137
A
B
Required spare parts
Spare part
Mechanical stop, axis 4, flange
Mechanical stop, axis 4, slider
Required tools and equipment
Equipment
Standard toolkit
Product manual - CRB 1300
3HAC083111-001 Revision: B
Mechanical stop, axis 4, flange
Mechanical stop, axis 4, slider
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the CRB 1300 via myABB Business Portal,
www.abb.com/myABB.
© Copyright 2022-2023 ABB. All rights reserved.
5.5.5 Replacing the axis-4 mechanical stops
Article number Note
3HAC065805-001 Replace if damaged.
3HAC065804-001 Replace if damaged.
Article number Note
- Content is defined in section
Standard toolkit on page
5 Repair
716.
Continues on next page
481