ABB CRB 1300 Product Manual page 116

3 Installation and commissioning
3.7.4.1 The SafeMove configurator app on FlexPendant
Continued
Prerequisites
Template configurations
The template configuration is adapted for the specific manipulator, and typically
contains one or two encapsulations of the arm, one encapsulation of the wrist
(intended for the tool), one or two safe zones, and a Cyclic Brake Check setting.
This configuration is typically a good start for a generic application with a smaller
tool.
The factory setting is an empty safety configuration. A loaded configuration can
be removed and the system is then reset to the factory setting.
Encapsulations
The encapsulations are geometries that can be in the shape of a sphere, capsule,
or lozenge. A sphere or capsule encapsulation can be modified in dimension and
position. A lozenge capsule can be modified in dimension, position, and rotation.
xx2200000445
Continues on next page
116
• The option SafeMove Collaborative is required.
• To edit a configuration, the grant Safety Services is required. A user without
this grant can view a configuration, but not modify, write it to the controller,
or apply it to the controller.
Note
For the CRB 1100 and CRB 1300, the SafeMove configurator app offers the same
functionality. The screenshots used in the manual can therefore show either one
of the robots.
© Copyright 2022-2023 ABB. All rights reserved.
Product manual - CRB 1300
3HAC083111-001 Revision: B