ABB CRB 1300 Product Manual page 433

5
Separating the cable package from the housing
1
2
Pulling out the cable package
1
2
3
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Snap loose and remove the male head of the
connectors from the connector plate.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Remove the axis-4 cable protector.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Wrap the connectors with the masking tape.
Pull the cable package out to the lower arm sup-
port.
© Copyright 2022-2023 ABB. All rights reserved.
5.5.3 Replacing the tubular and tilt unit
Note
xx2000001545
Note
xx2000001546
Note
xx2000001662
Continues on next page
5 Repair
Continued
433