5 Repair
5.5.2 Replacing the housing and extender unit
Continued
Removing the covers
1
2
Loosening the cables in the tubular
1
2
3
Continues on next page
382
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Remove the covers.
•
Tubular support cover (A)
•
Housing cover (B)
•
Lower arm covers (C)
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Cut the cable straps.
Remove the connector plates.
CAUTION
Be aware of the cablings that are attached to the
connector plate! The connector plate cannot be
removed completely until the connectors are re-
move from the plate.
© Copyright 2022-2023 ABB. All rights reserved.
Note
xx2000001661
Note
xx2000001530
xx2000001531
Product manual - CRB 1300
3HAC083111-001 Revision: B