ABB CRB 1300 Product Manual page 271

3
4
5
6
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Place the pressfit base (A) against one side of the
sealing and the pressfit tool (B) against the other
side, as shown in the figures.
Fix the pressift tool with an M8 screw.
Screw the screw, little by little and evenly, to press
the sealing into place.
Repeat steps 2 to 5 to replace the gearbox-side
radial sealing.
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued
Note
Axis-1 gearbox/motor sealing
pressfit base. Included in special
toolkit 3HAC076396-001.
xx2000001715
Axis-1 gearbox/motor sealing
pressfit tool. Included in special
toolkit 3HAC076396-001.
xx2000001716
xx2000001717
Radial sealing: 3HAC070148-002
Continues on next page
271