ABB CRB 1300 Product Manual page 192

4 Maintenance
4.6.1 Replacing the battery pack
Continued
3
Reconnecting the SMB connectors
1
2
3
4
Continues on next page
192
Action
Reconnect the battery cable.
Action
ELECTROSTATIC DISCHARGE (ESD)
The unit is sensitive to ESD. Before handling the
unit read the safety information in section
unit is sensitive to ESD on page
Reconnect the connectors.
• SMB.J1
• SMB.J2
• R2.SMB
Tip
See the number markings on the connectors for
help to find the corresponding connector.
Route and secure the cabling with cable straps.
CAUTION
Correct cable routing is highly important.
If the cables are routed and secured incorrectly
the cables can be damaged.
Refit the SMB cover to the base.
© Copyright 2022-2023 ABB. All rights reserved.
Note
xx2000001505
Note
The
49.
Tightening torque: 0.3 Nm
xx2000001504
Screw: M4x10 12.9 Lafre
2C2B/FC6.9 (6 pcs)
Tightening torque: 2.6 Nm
xx2000001503
Product manual - CRB 1300
3HAC083111-001 Revision: B