ABB CRB 1300 Product Manual page 301

2
3
4
5
6
7
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Check the oil plugs.
Replace if damaged.
Check the gasket.
Replace if damaged.
Apply grease to the axis-1 mechanical stop slider
and refit it to the swing.
Route the cable package through the swing and
out from the swing support side.
Place the swing down to the base.
Align the oil plugs on the swing with the marked
screws on the axis-1 gearbox.
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued
Note
Magnetic oil plug, G 1/4":
3HAC037925-001
Tightening torque: 10 Nm
xx2000001723
Gasket on swing: 3HAC067626-001
xx2000001704
Grease: 3HAC029132-001
xx2000001703
xx2000001699
Continues on next page
301