ABB CRB 1300 Product Manual page 387

Hide thumbs Also See for CRB 1300:

Table of Contents

Disconnecting the axis-4 motor connectors

Product manual - CRB 1300

3HAC083111-001 Revision: B

Remove the lamp unit.

Make sure that all supplies for electrical power,

hydraulic pressure, and air pressure are turned

Remove the connector plate.

Be aware of the cablings that are attached to the

connector plate! The connector plate cannot be

removed completely until the connectors are re-

move from the plate.

Cut the cable strap.

The motor cablings have another strap fixed. Al-

ways cut the strap that fixes the cable package

to the plate.

Disconnect the connectors.

Take photos of the connector and cable position

before disconnecting them, to have as a reference

when reconnecting.

5.5.2 Replacing the housing and extender unit

xx2200001003

xx2000001542

xx2000001543

xx2000001544

Continues on next page

Troubleshooting