ABB CRB 1300 Product Manual page 104

3 Installation and commissioning
3.5.2 Customer connections
Continued
Always remember to refit the protection covers after removing them.
xx2200000998
A
B
C
Scalable I/O device connection
For robot working with safetyIO-based laser scanners, a safety I/O device
DSQC1042 will be available and required to be connected with the base I/O device
DSQC1030 installed on the controller.
Continues on next page
104
(A)
(B)
CP/CS or Ethernet connector protection covers
SMB connector protection cover
Air hose connector protection covers
© Copyright 2022-2023 ABB. All rights reserved.
(A)
(C)
(C) (C)
Product manual - CRB 1300
3HAC083111-001 Revision: B