ABB CRB 1300 Product Manual page 307

5
6
Securing the cable package in the swing
1
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Refit the swing support.
Apply grease to the axis-2 cable protector and
slip it over the cable harness.
Action
Route the cable package up into the lower arm.
Make sure that the the air hoses are facing outside
in the axis-2 cable protector, see the figure as a
guidance for the cable twisting way.
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.2 Replacing the swing
Continued
Note
Screw: M8x40 12.9 Gleitmo
603+Geomet 500 (7 pcs)
Tightening torque: 36 Nm
xx2000001684
Grease: 3HAC029132-001
Plastic cable protector, axis 2:
3HAC067816-001
xx2000001567
Note
xx2000001746
Continues on next page
307