7
Separating the housing
1
2
3
Removing the axis-4 mechanical stop flange
1
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Remove the timing belt.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Support the weight of the tubular and tilt unit, and
remove the screws.
Separate the tubular from the housing.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
© Copyright 2022-2023 ABB. All rights reserved.
5.5.3 Replacing the tubular and tilt unit
Note
xx2000001670
Note
xx2000001729
xx2000001734
Note
Continues on next page
5 Repair
Continued
435