ABB CRB 1300 Product Manual page 442

5 Repair
5.5.3 Replacing the tubular and tilt unit
Continued
Removing the process hub
1
2
3
Continues on next page
442
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Remove the screws and carefully open the cover.
CAUTION
There is cabling attached to the cover. The cover
cannot be removed completely until the connect-
ors are removed.
Disconnect the air hoses.
© Copyright 2022-2023 ABB. All rights reserved.
Note
xx2200001000
xx2000001539
Product manual - CRB 1300
3HAC083111-001 Revision: B