ABB CRB 1300 Product Manual page 273

2
3
4
5
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Put the axis-1 gearbox on the workbench with the
gear side towards upside and place the assembly
cap to the gearbox.
Put the base onto the gearbox.
Turn the base together with the gearbox over to
the standing position.
Remove the assembly cap.
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.4.1 Replacing the base
Continued
Note
Axis-1 gearbox assembly cap. In-
cluded in special toolkit
3HAC076396-001.
xx2000001709
xx2000001710
xx2000001711
xx2000001712
Continues on next page
273