3
Pulling out the cable package
1
2
3
Removing the axis-3 timing belt
1
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Remove the cable brackets from the swing first
and then from the cable package.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
Wrap the connectors with the masking tape.
Pull the cable package out to the swing support.
Action
DANGER
Make sure that all supplies for electrical power,
hydraulic pressure, and air pressure are turned
off.
© Copyright 2022-2023 ABB. All rights reserved.
5 Repair
5.5.1 Replacing the lower arm
Continued
Note
xx2000001557
xx2100001466
Note
xx2000001683
Note
Continues on next page
341