ABB CRB 1300 Product Manual page 459

3
Reconnecting the air hoses and Ethernet cabling (if equipped)
1
2
Refitting the axis-6 motor
1
Product manual - CRB 1300
3HAC083111-001 Revision: B
Action
Refit the lamp unit cover.
Action
Reconnect the air hoses.
Note
See the number markings on the air hoses for
help to find the corresponding air hoses.
For robots with Ethernet cabling
Access the connector from the process hub and
reconnect the connector.
• J1.C2
Tip
See the number markings on the connectors for
help to find the corresponding connector.
Action
Check that:
• all assembly surfaces are clean and without
damages
• the motor is clean and undamaged.
© Copyright 2022-2023 ABB. All rights reserved.
5.5.3 Replacing the tubular and tilt unit
Note
Lamp unit cover: 3HAC082320-001
Screw: M3x8 12.9 Lafre
2C2B/FC6.9 (4 pcs)
Tightening torque: 0.6 Nm
xx2200001002
Note
xx2000001539
xx2200001001
Note
Continues on next page
5 Repair
Continued
459