Error Interrupt Flag Register (Err_Intflg); Error Interrupt Flag Clear Register (Err_Intclr); Error Threshold Register (Err_Threshold) Field Descriptions; Error Interrupt Flag Register (Err_Intflg) Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

Flash Registers
Table 5-137. Error Threshold Register (ERR_THRESHOLD) Field Descriptions
Bit Field
31-16 Reserved
15-0 THRESHOLD
5.4.4.9

Error Interrupt Flag Register (ERR_INTFLG)

31
15
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 5-138. Error Interrupt Flag Register (ERR_INTFLG) Field Descriptions
Bit Field
31-2 Reserved
1 UNC_ERR_INT_FLG
0 SINGLE_ERR_INT_FLG

5.4.4.10 Error Interrupt Flag Clear Register (ERR_INTCLR)

31
15
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 5-139. Error Interrupt Flag Clear Register (ERR_INTCLR) Field Descriptions
Bit Field
31-2 Reserved
1 UNC_ERR_INT_CLR
0 SINGLE_ERR_INT_CLR
574
Internal Memory
Value Description
Reserved
Single bit error threshold. Sets the threshold for single bit errors. When the ERR_CNT value equals
the THRESHOLD value and a single bit error occurs, SINGLE_ERR_INT flag is set, and an
interrupt is fired.
Figure 5-130. Error Interrupt Flag Register (ERR_INTFLG)
Reserved
R-0
Value Description
Reserved
Uncorrectable bit error interrupt flag. When a Un-correctable error occurs, this bit is set
and the UNC_ERR_INT interrupt is fired. When UNC_ERR_INT_CLR bit of
ERR_INTCLR register is written a value of 1 this bit is cleared.
Single bit error interrupt flag. When the ERR_CNT value equals the
ERR_THRESHOLD value and a single bit error occurs then SINGLE_ERR_INT flag is
set and SINGLE_ERR_INT interrupt is fired. When SINGLE_ERR_INT_CLR bit of
ERR_INTCLR register is written a value of 1 this bit is cleared.
Figure 5-131. Error Interrupt Flag Clear Register (ERR_INTCLR)
Reserved
R-0
Value Description
Reserved
Uncorrectable bit error interrupt flag clear. Writing a 1 to this bit will clear
UNC_ERR_INT_FLG. Writes of 0 have no effect.
Single bit error interrupt flag clear. Writing a 1 to this bit will clear
SINGLE_ERR_INT_FLG. Writes of 0 have no effect.
Copyright © 2012–2019, Texas Instruments Incorporated
Reserved
R-0
2
UNC_ERR_
Reserved
R-0
UNC_ERR_
INT_CLR
SPRUHE8E – October 2012 – Revised November 2019
1 0
SINGLE_ERR_
INT_FLG INT_FLG
R-0 R-0
2 1
SINGLE_ERR_
INT_CLR
R/W0- R/W0-
1 1
Submit Documentation Feedback
www.ti.com
16
16
0