Ctomipcaddr Register; Ctomipcdataw Register; Ctomipcdatar Register; Mtocipccom Register - Texas Instruments Concerto F28M36 Series Technical Reference Manual

www.ti.com

1.13.13.4 CTOMIPCADDR Register

31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit Field
31-0 ADDR

1.13.13.5 CTOMIPCDATAW Register

31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit Field
31-0 WDATA

1.13.13.6 CTOMIPCDATAR Register

31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit Field
31-0 RDATA

1.13.13.7 MTOCIPCCOM Register

31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
SPRUHE8E – October 2012 – Revised November 2019
Submit Documentation Feedback
Figure 1-181. CTOMIPCADDR Register
Table 1-193. CTOMIPCADDR Register Field Descriptions
Value Description
0 C28 TO M3 IPC Address Register. This register is used as an address holder for IPC commands
from the C28 to the M3 CPU. It is read/write to the C28 CPU and read only to the M3 CPU.
Figure 1-182. CTOMIPCDATAW Register
Table 1-194. CTOMIPCDATAW Register Field Descriptions
Value Description
0 C28 TO M3 IPC Data Write Registe. This register is used as a write data holder for IPC commands
from the C28 to the M3 CPU. It is read/write to the C28 CPU and read only to the M3 CPU.
Figure 1-183. CTOMIPCDATAR Register
Table 1-195. CTOMIPCDATAR Register Field Descriptions
Value Description
0 C28 TO M3 IPC Data Read Register. This register is used as a read data holder for IPC commands
from the C28 to the M3 CPU. It is read/write to the M3 CPU and read only to the C28 CPU.
Figure 1-184. MTOCIPCCOM Register
Copyright © 2012–2019, Texas Instruments Incorporated
ADDR
R/W-0
WDATA
R/W-0
RDATA
R-0
COMMAND
R/W-0
System Control Registers
System Control and Interrupts
0
0
0
0
301