Gpio Peripheral Identification 4 (Gpioperiphid4) Register; Gpio Peripheral Identification 4 (Gpioperiphid4) Register Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

General-Purpose Input/Output (GPIO)
4.1.6.20 GPIO Peripheral Identification 4 (GPIOPeriphID4) Register, offset 0xFD0
The GPIOPeriphID4, GPIOPeriphID5, GPIOPeriphID6, and GPIOPeriphID7 registers can conceptually be
treated as one 32-bit register; each register contains eight bits of the 32-bit register, used by software to
identify the peripheral.
Figure 4-23. GPIO Peripheral Identification 4 (GPIOPeriphID4) Register
31
15
Reserved
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 4-24. GPIO Peripheral Identification 4 (GPIOPeriphID4) Register Field Descriptions
Bit Field
31-8 Reserved
7-0 PID4
370
General-Purpose Input/Output (GPIO)
R-0
Value Description
Reserved
GPIO Peripheral ID Register [7:0]
Copyright © 2012–2019, Texas Instruments Incorporated
Reserved
R-0
8 7
SPRUHE8E – October 2012 – Revised November 2019
www.ti.com
PID4
R-0
Submit Documentation Feedback
16
0