Error Threshold Register (Err_Threshold); Error Interrupt Flag Register (Err_Intflg); Error Threshold Register (Err_Threshold) Field Descriptions; Error Interrupt Flag Register (Err_Intflg) Field Descriptions - Texas Instruments Concerto F28M35 Series Technical Reference Manual

www.ti.com
5.4.2.8

Error Threshold Register (ERR_THRESHOLD)

31
Reserved
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 5-103. Error Threshold Register (ERR_THRESHOLD) Field Descriptions
Bit Field
31-16 Reserved
15-0 THRESHOLD
5.4.2.9

Error Interrupt Flag Register (ERR_INTFLG)

31
15
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Table 5-104. Error Interrupt Flag Register (ERR_INTFLG) Field Descriptions
Bit Field
31-2 Reserved
1 UNC_ERR_INT_FLG
0 SINGLE_ERR_INT_FLG
SPRUH22I – April 2012 – Revised November 2019
Submit Documentation Feedback
Figure 5-99. Error Threshold Register (ERR_THRESHOLD)
R-0
Value Description
Reserved
Single bit error threshold. Sets the threshold for single bit errors. When the ERR_CNT value equals
the THRESHOLD value and a single bit error occurs, SINGLE_ERR_INT flag is set, and an
interrupt is fired.
Figure 5-100. Error Interrupt Flag Register (ERR_INTFLG)
Reserved
R-0
Value Description
Reserved
Uncorrectable bit error interrupt flag. When a Un-correctable error occurs, this bit is set
and the UNC_ERR_INT interrupt is fired. When UNC_ERR_INT_CLR bit of
ERR_INTCLR register is written a value of 1 this bit is cleared.
Single bit error interrupt flag. When the ERR_CNT value equals the
ERR_THRESHOLD value and a single bit error occurs then SINGLE_ERR_INT flag is
set and SINGLE_ERR_INT interrupt is fired. When SINGLE_ERR_INT_CLR bit of
ERR_INTCLR register is written a value of 1 this bit is cleared.
Copyright © 2012–2019, Texas Instruments Incorporated
16 15
Reserved
R-0
Flash Registers
THRESHOLD
R/W-0
2 1
UNC_ERR_ SINGLE_ERR_
INT_FLG INT_FLG
R-0
Internal Memory
0
16
0
R-0
521