Mtocipcbootmoderegister; Ctomipcbootsts Register Field Descriptions; Mtocipcbootmode Register Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

System Control Registers
Bit Field
31-0 BOOTSTS
1.13.13.12 MTOCIPCBOOTMODE Register
31
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit Field
31-0 BOOTMODE
304
System Control and Interrupts
Table 1-200. CTOMIPCBOOTSTS Register Field Descriptions
Value Description
0 C28 TO M3 IPC Boot Status Register. This is an IPC boot status register where C28 boot ROM
writes the boot status code that can be read by the M3 to report the boot condition of the C28. It is
read/write to the C28 CPU and read only to the M3 CPU
Figure 1-189. MTOCIPCBOOTMODERegister
Table 1-201. MTOCIPCBOOTMODE Register Field Descriptions
Value Description
0 M3 TO C28 IPC Boot Mode Register. This is an IPC boot mode register where the M3 can specify
the C28 boot mode to enter. It is read/write to the M3 CPU and read only to the C28 CPU.
Copyright © 2012–2019, Texas Instruments Incorporated
BOOTMODE
R/W-0
SPRUHE8E – October 2012 – Revised November 2019
www.ti.com
0
Submit Documentation Feedback