Device Configuration 1 (Dc1) Register; Device Configuration 1 (Dc1) Register Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

www.ti.com
Table 1-40. Device Identification 1 (DID1) Register Field Descriptions (continued)
Bit Field
2 ROHS
1-0 QUAL

1.13.2.3 Device Configuration 1 (DC1) Register

31 29 28
Reserved WDT1
R-x R-x
15
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset; x= indeterminate
Table 1-41. Device Configuration 1 (DC1) Register Field Descriptions
Bit Field
31-29 Reserved
28 WDT1
27-5 Reserved
4 PLL
3 WDT0
2-1 Reserved
0 JTAG
SPRUHE8E – October 2012 – Revised November 2019
Submit Documentation Feedback
Value Description
ROHS Compliance
0 Package is not ROHS compliant.
1 Package is ROHS compliant. Concerto devices are ROHS compliant.
Qual Status
This field specifies the qualification status of the device. The QUAL field value is encoded as
follows:
0 Engineering sample (TMX)
1 Pilot production (TMP)
2 Fully qualified (TMS)
All other encodings are reserved.
Figure 1-30. Device Configuration 1 (DC1) Register
27
Reserved
R-x
Value Description
Reserved
Watchdog Timer1
0 WDT1 is not present
1 WDT1 is present
Reserved
PLL
0 PLL is not present
1 PLL is present
Watchdog Timer0
0 WDT0 is not present
1 WDT0 is present
Reserved
JTAG Debugger Interface
0 JTAG debugger interface is not present
1 JTAG debugger interface is present
Copyright © 2012–2019, Texas Instruments Incorporated
System Control Registers
Reserved
R-x
5 4 3
PLL WDT0
R-x R-x
System Control and Interrupts
16
2 1 0
Reserved JTAG
R-x R-x
175