Adc Start Of Conversion Priority Control Register (Socprictl); Socprictl Register Field Descriptions - Texas Instruments Concerto F28M36 Series Technical Reference Manual

Analog-to-Digital Converter (ADC)
Table 10-12. INTSELxNy Register Field Descriptions (continued)
Bit Field
4-0 INTxSEL
10.3.11.4 ADC Priority Register
NOTE: The following SOC Priority Control Register is EALLOW protected.
Figure 10-28. ADC Start of Conversion Priority Control Register (SOCPRICTL)
15 14
ONESHOT Reserved
R/W-0 R-0
LEGEND: R/W = Read/Write; R = Read only; -n = value after reset
Bit Field
15 ONESHOT
14-11 Reserved
916
Analog Subsystem
Value Description
ADCINTx EOC Source Select
00h EOC0 is trigger for ADCINTx
01h EOC1 is trigger for ADCINTx
02h EOC2 is trigger for IADCNTx
03h EOC3 is trigger for ADCINTx
04h EOC4 is trigger for ADCINTx
05h EOC5 is trigger for ADCINTx
06h EOC6 is trigger for ADCINTx
07h EOC7 is trigger for ADCINTx
08h EOC8 is trigger for ADCINTx
09h EOC9 is trigger for ADCINTx
0Ah EOC10 is trigger for ADCINTx
0Bh EOC11 is trigger for ADCINTx
0Ch EOC12 is trigger for ADCINTx
.0Dh EOC13 is trigger for ADCINTx
0Eh EOC14 is trigger for ADCINTx
0Fh EOC15 is trigger for ADCINTx
1xh Invalid value.
11 10
Table 10-13. SOCPRICTL Register Field Descriptions
Value Description
0 One shot mode disabled
1 One shot mode enabled
Reserved
Copyright © 2012–2019, Texas Instruments Incorporated
5
RRPOINTER
R-20h
SPRUHE8E – October 2012 – Revised November 2019
www.ti.com
4
SOCPRIORITY
R/W-0
Submit Documentation Feedback
0