New Holland T8010 Manual page 1090

STEP 45
Program the proper refrigerant amount for your
tractor and press the ENTER key:
All MX/Magnum Tractor Models ....4.63 lbs (2.1 kg)
T h e d i s p l ay w i l l f l a s h o n c e i n d i c a t i n g t h e
programmed data has been accepted.
STEP 46
P r es s t he CH AR G E key to be gi n r ef r i g era n t
charging. AUTOMATIC and CHARGE will appear on
the display. The display shows the programmed
amount and counts down to zero as charging
proceeds. When charging is completed, the display
shows CPL.
IMPORTANT: Check the OEM equipment manual
before perfor ming Step 47 to avoid damaging
recovery unit. Pressure reading should be obtainable
with valves closed. Damage may occur if the tractor
is started with the valves accidently open or if either
or both valves are opened while the A/C system is
operating.
STEP 47
Completely close the high and low pressure manifold
valves.
Section 50 - Climate Control - Chapter 2
50-2-29
A22113
A22115
A22114