New Holland T8010 Manual page 1137

STEP 121
Use a hammer to tap the plate onto the shaft. Make
sure the plate is against the clutch shims. As the
plate is tapped onto the shaft you can hear the
difference in sound when the plate is fully installed.
STEP 122
Install the nut on the rotor shaft. Use the spanner
wrench and a torque wrench to tighten the nut to a
torque of 11 to 15 lb. ft. (15 to 20 Nm).
Section 50 - Climate Control - Chapter 2
50-2-76
A21272
A21253