New Holland T8010 Manual page 1101

Hide thumbs Also See for T8010:

Table of Contents

Turn the flushing valve to the AIR position. Allow air

to flow through the component until no noticeable

mist is discharged.

NOTE: Air pressure is the only means to remove the

flushing solvent from the A/C system, and no solvent

must remain in the system when it is evacuated and

recharged. Turn the component so gravity can assist

in solvent removal.

Turn the flushing valve to the CLOSED position.

Disconnect the flushing and drain hoses and

adapters from the component.

Install the flushing tank hose quick coupler on the

evaporation plug to prevent evaporation of the

solvent remaining in the tank during storage.

See Post Flushing Procedures, page 48.

Section 50 - Climate Control - Chapter 2

Chapters

Table of Contents

T8020 T8030 T8040