New Holland T8010 Manual page 1088

STEP 39
Connect the main power plug to a 115 volt AC outlet.
Move the main power switch to the ON position. If
program and vacuum do not appear at the top of the
display press the VACUUM key. Program a minimum
of 45 minutes and press the ENTER key. The display
will flash once indicating the programmed data has
been accepted.
STEP 40
Fully open the low and high pressure valves.
STEP 41
Open the red (vapor) and blue (liquid) valves on the
tank.
Section 50 - Climate Control - Chapter 2
50-2-27
A22113
A22114
A22107