STEP 20
Press SHIFT/RESET again to return to the normal
display mode.
Close the valve on the tank.
Close the valve on the service coupler by turning it
counterclockwise and disconnect the blue hose from
the vacuum pump.
STEP 21
Set the tank on the platform at the rear of the station.
Tighten the black strap securely around the tank.
STEP 22
Disconnect the R134a hose from the adapter.
Disconnect the adapter from the tank and store for
future use. Reinstall the cap on the red valve outlet
port.
The tank is now prepared. See the operator's manual
to prepare the recovery station for use.
Section 50 - Climate Control - Chapter 2
50-2-19
RR00E155
RR00E143
RR00E145