Component Flushing Procedure With Power Flush 17550 - New Holland T8010 Manual

Component Flushing Procedure with Power Flush 17550

STEP 52
All refrigerant must be recovered from the system
before flushing.
STEP 53
The 17550 power flush unit uses shop air to atomize
the flushing solvent and a pulsing action to scrub
residue and contaminants out of components.
Attach flushing adapters to the component to be
flushed. These adapters can be shop built or a
universal A/C flushing fitting set is available - Model
17582.
STEP 54
Fill the flushing reservoir 3/4 full with approved New
Holland flushing solvent. Do not overfill the
reservoir or you will restrict the pulsing action of
the unit.
STEP 55
Close the air and the flushing valves.
Section 50 - Climate Control - Chapter 2
50-2-37
Evaporator and Universal Fittings Shown
1
2
1. AIR VALVE
RP00G013
RD00H200
RD00H201
2. FLUSH VALVE