Siemens SINAMICS S110 List Manual page 67

115:
116:
118:
120:
133:
150:
200:
250:
260:
300:
350:
400:
Note: For parallel circuit configurations, the parameter index is assigned to a power unit.
r0204[0...n] Power unit hardware properties / PU HW property
SERVO_S110-CAN, Can be changed: -
SERVO_S110-DP,
Data type: Unsigned32
SERVO_S110-PN
P-Group: Converter
Not for motor type: -
Min
-
Description: Displays the properties supported by the power unit hardware.
Bit field: Bit Signal name
00 Device type
01 RFI filter available
02 Active Line Module available
03 Smart Line Module available
04 Basic Line Module available with thyristor
bridge
05 Basic Line Module available with diode
bridge
06 Liquid cooling with cooling system (chassis
PU)
07 F3E regenerative feedback into the line sup-
ply
08 Internal Braking Module
09 Different cooling type supported
12 Safe Brake Control (SBC) supported
13 Safety Integrated supported
14 Internal LC output filter
Note: For parallel circuit configurations, the parameter index is assigned to a power unit.
r0206[0...4] Rated power unit power / PU P_rated
SERVO_S110-CAN, Can be changed: -
SERVO_S110-DP,
Data type: FloatingPoint32
SERVO_S110-PN
P-Group: Converter
Not for motor type: -
Min
- [kW]
Description: Displays the rated power unit power for various load duty cycles.
Index: [0] = Rating plate
[1] = Load duty cycle with low overload
[2] = Load duty cycle with high overload
[3] = S1 cont duty cyc
[4] = S6 load duty cycle
Dependency: IECdrives (p0100 = 0): Units kW
NEMA drives (p0100 = 1): Units hp
Refer to: p0100
© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3
PM250 (SINAMICS G120)
PM260 (SINAMICS G120)
SINAMICS G120 Px
PM340 (SINAMICS S120)
SINAMICS G120C
SINAMICS G
SINAMICS GM
SINAMICS SM
SINAMICS SM120
SINAMICS GL
SINAMICS SL
SINAMICS DCM
Calculated: -
Dynamic index: PDS
Units group: -
Scaling: -
Max
-
1 signal
DC/AC device
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Calculated: -
Dynamic index: -
Units group: 14_6
Scaling: -
Max
- [kW]
Parameter
List of parameters
Access level: 3
Func. diagram: -
Unit selection: -
Expert list: 1
Factory setting
-
0 signal FP
AC/AC device -
No -
No -
No -
No -
No -
No -
No -
No -
No -
Yes -
No -
No -
Access level: 2
Func. diagram: -
Unit selection: p0100
Expert list: 1
Factory setting
- [kW]
1-67